Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands N-R
▀ ppp
▄ Command Line Interface Reference, StarOS Release 17
2660
first-lcp-retransmit-timeout milliseconds
Specifies the number of milliseconds to wait before attempting to retransmit control packets. This value
configures the first retry. All subsequent retries are controlled by the value configured for the ppp
configures the first retry. All subsequent retries are controlled by the value configured for the ppp
retransmit-timeout
keyword.
milliseconds
must be an integer from 100 through 5000. Default: 3000
lcp-authentication-discard retry-alternate num_discard
Sets the number of discards up to which authentication option is discarded during LCP negotiation and retries
starts to allow alternate authentication option.
starts to allow alternate authentication option.
num_discard
must be an integer from 0 through 5.
Recommended value is 2. Default: Disabled.
lcp-authentication-reject retry-alternate
Specifies the action to be taken if the authentication option is rejected during LCP negotiation and retries the
allowed alternate authentication option.
Default: Disabled. No alternate authentication option will be retried.
allowed alternate authentication option.
Default: Disabled. No alternate authentication option will be retried.
lcp-start-delay
delay
Specifies the delay (in milliseconds) before link control protocol (LCP) is started.
delay
must be an integer
from 0 through 5000. Default: 0
lcp-terminate connect-state
Enables sending an LCP terminate message to the Mobile Node when a PPP session is disconnected if the
PPP session was already in a connected state.
Note that if the no keyword is used with this option, the PDSN must still send LCP Terminate in the event of
an LCP/PCP negotiation failure or PPP authentication failure, which happens during connecting state.
PPP session was already in a connected state.
Note that if the no keyword is used with this option, the PDSN must still send LCP Terminate in the event of
an LCP/PCP negotiation failure or PPP authentication failure, which happens during connecting state.
Important:
This option is not supported in conjunction with the GGSN product.
lcp-terminate mip-lifetime-expiry
Configures the PDSN to send an LCP Terminate Request when a MIP Session is terminated due to MIP
Lifetime expiry (default).
Note that if the no keyword is used with this option, the PDSN does not send a LCP Terminate Request when
a MIP session is terminated due to MIP Lifetime expiry.
Lifetime expiry (default).
Note that if the no keyword is used with this option, the PDSN does not send a LCP Terminate Request when
a MIP session is terminated due to MIP Lifetime expiry.
lcp-terminate mip-revocation
Configures the PDSN to send a LCP Terminate Request when a MIP Session is terminated due to a
Revocation being received from the HA (default).
Note that if the no keyword is used with this option, the PDSN does not send a LCP Terminate Request when
a MIP session is terminated due to a Revocation being received from the HA.
Revocation being received from the HA (default).
Note that if the no keyword is used with this option, the PDSN does not send a LCP Terminate Request when
a MIP session is terminated due to a Revocation being received from the HA.
max-authentication-attempts num
Configures the maximum number of time the PPP authentication attempt is allowed.
num
must be an integer
from 1 through 10. Default: 1