Cisco Cisco Packet Data Interworking Function (PDIF)
PCC-Service-Profile Configuration Mode Commands
▀ timeout long-duration
▄ Command Line Interface Reference, StarOS Release 17
7696
disconnect
: sets the system to send SNMP TRAP and CORBA notification and disconnect the
subscriber session once the long duration timeout timer is expired.
Usage
Use this command to set the long duration timeout period and actions to be taken on expiry of duration of
timer for subscriber session.
timer for subscriber session.
Important:
Reduce the timeout duration to free session resources faster for use by new requests.
Important:
In case of long-duration timeout configured at PCC Service Configuration mode as well as at the
PCC-Profile Configuration mode level, the long-duration timeout and action set in PCC-Profile Configuration mode will
prevail. This enables defining session behavior as per profile provisioning.
prevail. This enables defining session behavior as per profile provisioning.
Example
Following command sets the system to detect the subscriber sessions that exceeds the long duration timer of
6000 seconds and sends SNMP TRAP and CORBA notification:
6000 seconds and sends SNMP TRAP and CORBA notification:
timeout long-duration 6000 action detection
Following command sets the system to detect and disconnect the subscriber sessions that exceeds the long
duration timer of 6000 seconds and disconnect the session after sending SNMP TRAP and CORBA
notification:
duration timer of 6000 seconds and disconnect the session after sending SNMP TRAP and CORBA
notification:
timeout long-duration 6000 action disconnect