Cisco Cisco Packet Data Gateway (PDG)
APN Profile Configuration Mode
▀ qos rate-limit direction
▄ Command Line Interface Reference, StarOS Release 16
1508
qos rate-limit direction
Configures the actions governing the subscriber traffic flow, if the flow violates or exceeds the configured or netogiated
peak or committed data-rates.
peak or committed data-rates.
This command can be entered multiple times to specify different combinations of traffic direction and class. The SGSN
only performs traffic policing if
only performs traffic policing if
qos rate-limit direction
is configured.
Additional information on the QoS traffic policing functionality is located in the System Administration Guide.
Product
SGSN
S-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
qos rate-limit direction { downlink | uplink } [ burst-size { auto-readjust [ duration
seconds ] | bytes } ] [ class { background | conversational | interactive
traffic_priority | streaming } ] [ exceed-action { drop | lower-ip-precedence | transmit
} ] [ gbr-qci [ committed-auto-readjust durarion seconds ] ] [ non-gbr-qci [ committed-
auto-readjust durarion seconds ] ] [ violate-action { drop | lower-ip-precedence |
transmit } ] +
seconds ] | bytes } ] [ class { background | conversational | interactive
traffic_priority | streaming } ] [ exceed-action { drop | lower-ip-precedence | transmit
} ] [ gbr-qci [ committed-auto-readjust durarion seconds ] ] [ non-gbr-qci [ committed-
auto-readjust durarion seconds ] ] [ violate-action { drop | lower-ip-precedence |
transmit } ] +
remove qos rate-limit direction { downlink | uplink } [ class { background |
conversational | interactive traffic_priority | streaming } ]
conversational | interactive traffic_priority | streaming } ]
remove
Removes the qos rate-limit direction entries from the configuration.
downlink | uplink
Apply the limits and actions configured with the other keywords to the selected link:
downlink
- This is the direction from the GGSN or P-GW to the MS.
uplink
- This is the direction from the MS to the GGSN or the P-GW.
burst-size { auto-readjust [ duration
seconds ] | bytes }
Default: See the table of class default values in the Usage section below.
This keyword specifies the peak burst size allowed. System measurements for this value exclude the GTP and
outer packet headers. Supported options include:
This keyword specifies the peak burst size allowed. System measurements for this value exclude the GTP and
outer packet headers. Supported options include:
auto-readjust
: This keyword enables dynamic burst-size calculation using negotiated peak data-rate
and negotiated committed data-rate.