Cisco Cisco Packet Data Gateway (PDG)
CSCF Peer Server Monitoring Configuration Mode Commands
mode ▀
Command Line Interface Reference, StarOS Release 16 ▄
3085
mode
Sets the peer server mode to either active or standby. By default, peer servers are in active mode.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Peer Servers Configuration > Server Configuration
configure > context context_name > cscf peer-servers server_name type { bgcf | ibcf |
icscf | mgcf | mrcf | pcscf | scscf | sip-as } > server server_name { address ip_address
| domain domain_name )
icscf | mgcf | mrcf | pcscf | scscf | sip-as } > server server_name { address ip_address
| domain domain_name )
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-server_name-peer-server)#
Syntax
mode { active | standby }
active
Defines the mode of the CSCF peer server as active.
standby
Defines the mode of the CSCF peer server as standby.
Usage
Use this command to set the peer server mode to either active or standby.
Example
The following command sets the peer server’s mode to standby:
mode standby