Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (D-S)
ping6 ▀
Command Line Interface Reference, StarOS Release 16 ▄
4049
ping6
Specifies ping options for IPv6 addresses.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
ping6 { hostname | ipv6 address } [ count num ] [ flood ] [ pattern val ] [ size val ] [
src ip_address ] [ interface string ] [ vrf vrf_name
src ip_address ] [ interface string ] [ vrf vrf_name
hostname
Name of the host to be pinged.
ipv6 address
IPv6 address of host to be pinged in colon-separated-hexadecimal notation.
countnum
Sets the number of ping packets to be sent as an integer from 1 through 10000.
flood
Configures ping6 to send packets as quickly as possible, or 100 per second, whichever is faster.
pattern val
Specifies the hexadecimal pattern to fill ICMP packets as a hexadecimal number from 0x0 through 0ffff
size
val
Specifies the size of ICMP datagram (in bytes) as an integer from 40 through 18432. Default: 56.
src
ip_address
Specifies the source IP address in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.
interface
string
Specifies the originating source interface name as an alphanumeric string of 1 through 79 characters.
vrf
name
Specifies the name of an existing VFR as an alphanumeric string of 1 through 63 characters.