Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (D-G)
show file ▀
Command Line Interface Reference, StarOS Release 16 ▄
4461
show file
Displays the contents of the file specified. The contents are paginated as if it were normal ASCII output.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show file url url [ | { grep grep_options | more } ]
url
url
Specifies the location of a file to display.
url
may refer to a local or a remote file.
url
must be entered using
the following format:
For the ASR 5000:
For the ASR 5000:
[ file: ]{ /flash | /pcmcia1 | /hd }[ /directory ]/file_name
tftp://{ host[ :port# ] }[ /directory ]/file_name
[ http: | ftp: | sftp: ]//[ username[ :password ]@ ] { host }[ :port# ][
/directory ]/file_name
/directory ]/file_name
For the ASR 5500:
[ file: ]{ /flash | /usb1 | /hd }[ /directory ]/file_name
tftp://{ host[ :port# ] }[ /directory ]/file_name
[ http: | ftp: | sftp: ]//[ username[ :password ]@ ] { host }[ :port# ][
/directory ]/file_name
/directory ]/file_name
Important:
Use of the SMC hard drive is not supported in this release.
Important:
Do not use the following characters when entering a string for the field names below: “/” (forward
slash), “:” (colon) or “@” (at sign).
directory
is the directory name.
filename
is the actual file of interest.
username
is the user to be authenticated.