Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands (A-K)
▀ aaa large-configuration
▄ Command Line Interface Reference, StarOS Release 16
5138
aaa large-configuration
This command enables or disables the system to accept a large number of RADIUS configurations to be defined and
stored.
stored.
Important:
For this command to take affect, after entering the command the configuration must be saved and
reloaded.
When aaa large-configuration is disabled, the following restrictions are in place:
Only one (1) NAS IP address can be defined per context with the
radius attribute
command.
The RADIUS attribute nas-ip-address can only be configured if the RADIUS group is default.
Only 320 RADIUS servers can be configured system-wide.
Only 64 RADIUS groups can be configured system-wide.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] aaa large-configuration
no
Disables AAA large configuration support.
Usage
When aaa large-configuration is enabled, the system provides the ability to configure multiple NAS IP
addresses in a single context to used with different radius groups. As well, the command allows support for
up to 1,600 RADIUS server configurations and for a PDSN a maximum of 400 or for a GGSN a maximum of
800 RADIUS server group configurations system-wide.
addresses in a single context to used with different radius groups. As well, the command allows support for
up to 1,600 RADIUS server configurations and for a PDSN a maximum of 400 or for a GGSN a maximum of
800 RADIUS server group configurations system-wide.
Example
To enable the definition of a large number of RADIUS configurations, enter the following commands in the
following order:
In APN Configuration mode, enter:
following order:
In APN Configuration mode, enter:
default aaa group
In Global Configuration mode, enter: