Cisco Cisco Packet Data Gateway (PDG)
GPRS Service Configuration Mode Commands
▀ associate-dscp-template
▄ Command Line Interface Reference, StarOS Release 16
5870
associate-dscp-template
Identifies a DSCP template to be associated with the GPRS service.
Important:
This command is used only in Releases 12.0 and 12.2. For Release 14.0 refer to the
associate
command.
Important:
This command can be used before the associated DSCP template instance is created and configured
but care should be used to match the template names.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gprs-service)#
Syntax
associate-dscp-template downlink template_name
no associate-dscp-template downlink
no
Removes the template association definition from the configuration.
template_name
Specifies a unique DSCP template to associate with this GPRS service.
template_name
must be a string of 1 to 64 alphanumeric characters with dots (.), dashes (-), and forward
slashes (/) but with no spaces.
Usage
Use this command to associate DSCP templates with this GPRS service. A single template can be associated
with multiple GPRS services.
Related commands:
with multiple GPRS services.
Related commands:
The dscp-template command in the SGSN Global configuration mode creates / deletes an instance of a
template. This command also provides access to the mode containing all the configuration
commands used to define DSCP settings for the control packets for the Iu interface and the control
and data packets for the Gb interface (see the DSCP Template Configuration Mode Commands
section).
commands used to define DSCP settings for the control packets for the Iu interface and the control
and data packets for the Gb interface (see the DSCP Template Configuration Mode Commands
section).