Cisco Cisco Packet Data Gateway (PDG)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
MAP Service Configuration Mode Commands
▀ gmlc
▄ Command Line Interface Reference, StarOS Release 16
7016
gmlc
This command identifies the gateway mobile location center (GMLC) associated with the Location Service
functionality.
functionality.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > MAP Service Configuration
configure > context context_name > map-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-map-service-service_name)#
Syntax
gmlc { isdn E.164_number | point-code point-code } [ gsn-address ipv4 address ] [ source-
ssn SSN_value ]
ssn SSN_value ]
no gmlc { isdn | point-code }
no
Deletes the GMLC configuration. When the
no
form of the command is used the SGSN aborts all active
Location Requests towards that GMLC and stops the Location Service functions.
isdn number
Enter the E.164 number of the GMLC.
number:
must be a string of 1 to 15 digits.
Important:
isdn
can not be used if
point-code
is used.
point-code
pt_code
Enter SS7 point code address of the GMLC in dotted-decimal format according to variant settings:
ITU Range 0.0.1 to 7.255.7
ANSI Range 0.0.1 to 255.255.255
TTC Range 0.0.1 to 15.31.255
or a string of 1 to 11 characters
Important:
point-code
can not be used if
isdn
is used.