Cisco Cisco Packet Data Gateway (PDG)
RoHC Profile Decompression Configuration Mode Commands
▀ use-crc-option
▄ Command Line Interface Reference, StarOS Release 16
8072
use-crc-option
Controls usage of the RoHC cyclic redundancy check (CRC) option. The CRC option contains an 8-bit CRC computed
over the entire feedback payload, without the packet type and code octet, but including any CID fields,
over the entire feedback payload, without the packet type and code octet, but including any CID fields,
Product
HSGW
PDSN
Privilege
Administrator
Mode
Exec > Global Configuration > RoHC Profile Configuration >
configure > rohc-profile profile-name profile_name > decompression-options
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-rohcprofile-profile_name-decomp)#
Syntax
[ default | no ] use-crc-option
default
Returns the command to its default value of enabled.
no
Disables use of the CRC option.
Usage
Use this command to enable and disable the use of the RoHC CRC option.
Example
The following command enables RoHC CRC option usage:
use-crc-option
The following command disables RoHC CRC option usage:
no use-crc-option