Cisco Cisco Packet Data Interworking Function (PDIF)
AAA Server Group Configuration Mode Commands
▀ radius accounting server
▄ Command Line Interface Reference, StarOS Release 16
184
In 12.1 and earlier releases, the key
value
must be an alphanumeric string of 1 through 127 characters
without encryption, and 1 through 256 characters with encryption.
In StarOS 12.2 and later releases, the key
In StarOS 12.2 and later releases, the key
value
must be an alphanumeric string of 1 through 127 characters
without encryption, and 1 through 236 characters with encryption enabled.
The
The
encrypted
keyword is intended only for use by the chassis while saving configuration scripts. The
system displays the
encrypted
keyword in the configuration file as a flag that the variable following the
key
keyword is the encrypted version of the plaint text key. Only the encrypted key is saved as part of the
configuration file.
acct-on { disable | enable }
This keyword enables/disables sending of the Accounting-On message when a new RADIUS server is added
to the configuration. By default, this keyword will be disabled.
When enabled, the Accounting-On message is sent when a new RADIUS server is added in the configuration.
However, if for some reason the Accounting-On message cannot be sent at the time of server configuration
(for example, if the interface is down), then the message is sent as soon as possible. Once the Accounting-On
message is sent, if it is not responded to after the configured RADIUS accounting timeout, the message is
retried the configured number of RADIUS accounting retries. Once all retries have been exhausted, the
system no longer attempts to send the Accounting-On message for this server.
to the configuration. By default, this keyword will be disabled.
When enabled, the Accounting-On message is sent when a new RADIUS server is added in the configuration.
However, if for some reason the Accounting-On message cannot be sent at the time of server configuration
(for example, if the interface is down), then the message is sent as soon as possible. Once the Accounting-On
message is sent, if it is not responded to after the configured RADIUS accounting timeout, the message is
retried the configured number of RADIUS accounting retries. Once all retries have been exhausted, the
system no longer attempts to send the Accounting-On message for this server.
acct-off { disable | enable }
Disables and enables the sending of the Accounting-Off message when a RADIUS server is removed from
the configuration.
The Accounting-Off message is sent when a RADIUS server is removed from the configuration, or when
there is an orderly shutdown. However, if for some reason the Accounting-On message cannot be sent at this
time, it is never sent. The Accounting-Off message is sent only once, regardless of how many accounting
retries are enabled.
Default: enable
the configuration.
The Accounting-Off message is sent when a RADIUS server is removed from the configuration, or when
there is an orderly shutdown. However, if for some reason the Accounting-On message cannot be sent at this
time, it is never sent. The Accounting-Off message is sent only once, regardless of how many accounting
retries are enabled.
Default: enable
max max_messages
Specifies the maximum number of outstanding messages that may be allowed to the server.
max_messages
must be an integer from 0 through 4000.
Default: 0
max-rate max_value
Specifies the rate at which the accounting messages should be sent to the RADIUS server by a single AAA
manager task.
manager task.
max_value
must be an integer from 0 through 1000.
Default: 0 (disabled)
oldports
Sets the UDP communication port to the out of date standardized default for RADIUS communications to
1646.
1646.
priority priority
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
determining which server to send accounting data to.
priority
must be an integer from 1 through 1000, where 1 is the highest priority. When configuring two or
more servers with the same priority you will be asked to confirm that you want to do this. If you use the
-