Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands N-R
▀ pilot-packet
▄ Command Line Interface Reference, StarOS Release 16
2586
Important:
For Pilot Packet, the generated UDP packet is currently expected to use DSCP 0x20 (32).
Usage
Use this command to configure Pilot Packet parameters.
Example
The following command configures pilot packets with source and destination IPv4/IPv6 addresses along with
the destination port:
the destination port:
pilot-packet source-ip-address 10.2.3.4 destination-ip-address 10.3.4.5
destination-udp-port 221
destination-udp-port 221