Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (A-K)
cli ▀
Command Line Interface Reference, StarOS Release 16 ▄
5177
Once this test mode is entered under Global Configuration mode, cli test-commands become part of the
current configuration. Therefore, any generated configuration will contain the cli test-commands command
as the first configuration command.
current configuration. Therefore, any generated configuration will contain the cli test-commands command
as the first configuration command.
Caution:
Use of CLI test-commands may cause significant service interruption. Contact Cisco TAC before
executing any commands while in this mode.
The no cli test-commands command disables access to the CLI test-commands mode.
trap config-mode
Enables sending an SNMP trap (starCLIConfigMode) when a CLI user enters the configuration mode.
Usage
This command sets access parameters and enables several operational parameters for the system’s command
line interface.
line interface.
Example
The following command sets the number of allowed simultaneous CLI sessions to
5
.
cli max-sessions 5
The following command sets the command monitor protocol to administrator-only
cli access monitor-protocol administrator