Cisco Cisco Packet Data Interworking Function (PDIF)
Local Policy Ruledef Configuration Mode Commands
condition ▀
Command Line Interface Reference, StarOS Release 16 ▄
6821
serving-plmn
PLMN associated with the current node serving the subscribe expressed as an alphanumeric string of
1 through 63 characters.
1 through 63 characters.
tai
Tracking Area Identification associated with the subscriber as expressed as an alphanumeric string
of 1 through 63 characters.
of 1 through 63 characters.
Important:
This variable is available only in 15.0 and earlier releases. In 16.0 and
later releases, it is deprecated.
time-of-day
Time associated with the change. <Clock in format HH:mm:ss or HH:mm >
timer
Timer name as expressed as an alphanumeric string of 1 through 63 characters.
Important:
This variable is available only in 15.0 and earlier releases. In 16.0 and
later releases, it is deprecated.
eq | ge | gt | le | lt | match | ne | nomatch
eq
: Operation equal to
ge
: Operation greater than or equal to
gt
: Operation greater than
le
: Operation less than or equal to
lt
: Operation less than
match
: Operation match
ne
: Operation not equal to
nomatch
: Operation nomatch
no condition priority priority
Deletes the specified condition.
Usage
Use this command to configure the conditions which trigger the ruledef event. A ruledef represents a set of
matching conditions.
This command can be entered multiple times to configure multiple conditions for a ruledef. The conditions
are examined in priority order until a match is found and the corresponding condition is applied.
matching conditions.
This command can be entered multiple times to configure multiple conditions for a ruledef. The conditions
are examined in priority order until a match is found and the corresponding condition is applied.
Example
The following command creates a condition with priority set to
5
and configured match apn
myapn*
:
condition priority 5 apn match myapn*