Cisco Cisco Packet Data Gateway (PDG)
ePDG CDR Field Descriptions
CDR Fields ▀
GTPP Interface Administration and Reference, StarOS Release 18 ▄
95
Charging Characteristics
Lists the charging characteristics applied to the PDP context by the ePDG. The ePDG accepts the charging characteristics
from the AAA server or use its own configured values.
from the AAA server or use its own configured values.
Format
Octet string
Length
2 bytes
Charging Characteristics Selection Mode
This field specifies how the Charging Characteristics was selected.
Supported values:
subscriptionSpecific (1)
aPNSpecific (2)
Format
Enumerated
Length
1 byte
Charging ID
This field is a charging identifier, which can be used together with the P-GW address to identify all records involved in a
single bearer context. The Charging ID is generated by the P-GW during bearer context activation and is transferred to the
context requesting ePDG.
single bearer context. The Charging ID is generated by the P-GW during bearer context activation and is transferred to the
context requesting ePDG.
Format
Integer
Length
1-5 bytes
Duration
This field contains the duration in seconds for the record. For partial records, only the interval described by the
“recordOpeningTime” and the “last ChangeTime” in the “ListOfTrafficVolumes” is counted. The value is reset for each new
partial CDR. This value is converted from the internal representation in milliseconds to an integer value representing only
seconds. The mechanism for this conversion (ceiling, floor, round-off) can be configured.
“recordOpeningTime” and the “last ChangeTime” in the “ListOfTrafficVolumes” is counted. The value is reset for each new
partial CDR. This value is converted from the internal representation in milliseconds to an integer value representing only
seconds. The mechanism for this conversion (ceiling, floor, round-off) can be configured.
Format
Integer
Length
1-5 bytes