Cisco Cisco Packet Data Gateway (PDG)

Pagina di 427
  S-GW CDR Field Descriptions 
CDR Fields  ▀   
 
GTPP Interface Administration and Reference, StarOS Release 17  ▄  
 
   
379 
        sGSN      (0), 
        pMIPSGW   (1), 
        gTPSGW    (2), 
        ePDG      (3), 
        hSGW      (4), 
        mME       (5) 
NOTE: In the SGW-CDR, the possible values are SGSN(0) and MME(5).
 
Format 
Sequence of serving Node Type
 
Length 
Variable length format (Based on number of nodes connected during this period).
 
SGW Address Used 
This field is the serving S-GW IP address for the Control Plane. If both an IPv4 and an IPv6 address of the S-GW is available, 
the S-GW includes the IPv4 address in the CDR. This is a choice attribute and the CDR can contain the binary format or the 
ASCII format in the CDR.
 
Format 
Octet string
 
Length 
The length can vary based on whether the encoded IP address is IPv4 or IPv6.
 
SGW IPv4 Binary Address 
This field is the serving control plane S-GW IPv4 address on the S5 interface.
 
Format 
Octet string
 
Length 
4 bytes
 
SGW IPv6 Binary Address 
This field is the serving control plane S-GW IPv6 address on the S5 interface.
 
Format 
Octet string
 
Length 
16 bytes