Cisco Cisco Aironet 350 Wireless LAN Client Adapter Guida All'Installazione
35
Step 8
Click Next. The Successfully added <network name> dialog box
appears. From this dialog box, you can either connect to a network
with the profile you created, or you can change the settings of the
profile that you just created.
appears. From this dialog box, you can either connect to a network
with the profile you created, or you can change the settings of the
profile that you just created.
In Case of Difficulty
If you experience difficulty getting your client adapter installed and running,
look for a solution to your problem in the following places:
look for a solution to your problem in the following places:
•
ADU’s troubleshooting utility. To use this utility, open ADU, choose
Troubleshooting from the Action drop-down menu, and click Run Test.
The utility runs and displays the results.
Troubleshooting from the Action drop-down menu, and click Run Test.
The utility runs and displays the results.
•
The Windows Vista diagnostic application.
•
The “Troubleshooting chapter” of the Cisco Aironet 802.11a/b/g
Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and
Configuration Guide.
Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and
Configuration Guide.
•
The Technical Assistance Center (TAC) website. To access this site, go
to Cisco.com, click Technical Support & Documentation > Technical
Support & Documentation. Click Documentation and then click
to Cisco.com, click Technical Support & Documentation > Technical
Support & Documentation. Click Documentation and then click