Cisco Cisco Packet Data Gateway (PDG)
• roaming-mode { home | roaming | visiting } Supports separate PDP context or PDN connection
processing for roaming subscribers.
Performance Indicator Changes
show apn <apn_name>
This command displays the virtual-apn configuration based on pdp-type and pdp-type along with roaming-mode.
The output of this command has been modified to display the following fields:
The output of this command has been modified to display the following fields:
Virtual APN Configuration:
Preference Rule-Definition
Preference Rule-Definition
Selected-APN
1
PDP Type = ipv4 telenor.ipv4v6
2
PDP Type = ipv6 telenor.nat64
3
PDP Type = ipv4v6
Roaming mode = roaming telenor.nat64
show pgw-service stats all
This command displays the virtual-apn configuration based on pdp-type and pdp-type along with roaming-mode.
The output of this command has been modified to display the following fields:
The output of this command has been modified to display the following fields:
Virtual APN Configuration:
Preference Rule-Definition
Preference Rule-Definition
Selected-APN
1
PDP Type = ipv4 telenor.ipv4v6
2
PDP Type = ipv6 telenor.nat64
3
PDP Type = ipv4v6
Roaming mode = roaming telenor.nat64
show saegw-service stats all function pgw
This command has been modified to include counters to indicate the number of PDNs setup and rejected for
Virtual APNs selected on the basis of PDP-type at the service level. Modified output includes the following
fields:
Virtual APNs selected on the basis of PDP-type at the service level. Modified output includes the following
fields:
VAPNs Selected Based on Configured PDP-Type
IPv4: Setup: 8
IPv4: Setup: 8
Rejected: 5
IPv6: Setup: 8
Rejected: 5
IPv4v6: Setup: 8
Rejected: 5
Virtual APN Selection Based on CC-Behavior
CSCuu43329 - Virtual APN selection based on all 16 bits of charging characteristics.
Applicable Products: GGSN, P-GW, SAEGW
Feature Changes
Virtual APN Selection feature enables an operator to select Virtual APN based on all 16 bits of Charging
Characteristics for GGSN, P-GW, and SAEGW nodes. Earlier, virtual APN selection was possible only on
the basis on 4 cc-profile bits. With this feature, now an operator can select a Virtual APN on the basis on 4
cc-profile bits and 12 cc-behavior bits or on the basis on complete 16 cc-behavior bits. This selection can be
done with the help of a CLI.
Characteristics for GGSN, P-GW, and SAEGW nodes. Earlier, virtual APN selection was possible only on
the basis on 4 cc-profile bits. With this feature, now an operator can select a Virtual APN on the basis on 4
cc-profile bits and 12 cc-behavior bits or on the basis on complete 16 cc-behavior bits. This selection can be
done with the help of a CLI.
Previous Behavior: Earlier, Virtual APN selection was possible on the basis of 4 cc-profile bits.
Release Change Reference, StarOS Release 19
107
GGSN Changes in Release 19
Virtual APN Selection Based on CC-Behavior