Cisco Cisco Packet Data Gateway (PDG)
SaMOG Changes in Release 17
▀ SaMOG Enhancements for 17.0
▄ Release Change Reference, StarOS Release 17
444
For web authorization, in order to facilitate HTTP redirection to the authorization portal during the pre-authentication
phase, the IP context name can be configured under the APN Profile Configuration Mode using the following
command:
phase, the IP context name can be configured under the APN Profile Configuration Mode using the following
command:
configure
apn-profile profile_name
ip context-name context_name
no ip context-name
end
ip access-group
For web authorization, in order to facilitate HTTP redirection to the authorization portal during the pre-authentication
phase, the IP access group can be configured under the APN Profile Configuration Mode using the following command:
phase, the IP access group can be configured under the APN Profile Configuration Mode using the following command:
configure
apn-profile profile_name
[ no ] ip access-group group_name [ in | out ]
end
timeout
In support of the Web Authorization feature, the
timeout
command has been introduced under the Call Control Profile
Configuration Mode to clear the cached MAC to IMSI mapping entry that was created during the pre-authentication
phase if the entry is not cleared for more than the configured duration.
phase if the entry is not cleared for more than the configured duration.
configure
call-control-profile profile_name
timeout imsi cache timer_value
{ default | no } timeout imsi cache
end
Notes:
Default: 1440 minutes
subscriber
In support of the Web Authorization feature, the
subscriber
command has been introduced under the Call Control
Profile Configuration Mode to specify if the Operator Policy permits multiple PDN connections for the same IMSI. This
command can be used to permit or restrict the number of devices allowed for one subscriber.
command can be used to permit or restrict the number of devices allowed for one subscriber.
configure