Cisco Cisco Packet Data Gateway (PDG)
SGSN Changes in Release 16
▀ SGSN Enhancements for 16.0
▄ Release Change Reference, StarOS Release 16
518
show subscribers gprs-only full imsi < >
This show command is updated to display the subscription type being used for primary PDP activation. The field
Subscription Type
is added to the show output. The subscription type is displayed as either
EPS
or
GPRS
.
CSCue32234 - [S4-SGSN] UE-AMBR override from local config shall be
supported
Feature Changes
Capping UE AMBR Based on Local Configuration
The operator can now cap the subscribed UE AMBR value with a change of the local configuration. Or, the operator can
set the prefer-cap type.
set the prefer-cap type.
Related Issues: CSCtx38089
Command Changes
qos
ue-ambr
is a newly supported keyword in the
qos
command. This keyword enables the operator to configure either
the aggregate maximum bit rate stored on the UE (UE AMBR) or select the preferred uplink and downlink QoS cap
values.
values.
configure
call-control-profile profile_name
qos ue-ambr { max-ul max_ul_value max-dl max_dl_value | prefer-as-cap { both-hss-
and-local minimum | local }
and-local minimum | local }
remove qos ue-ambr
end
Notes:
max-ul
defines the maximum bit rate for uplink traffic; range 0 to 1410065408.
max-dl
defines the maximum bit rate for downlink traffic; range 0 to 1410065408.
both-hss-and-local minimum
use the lower of either the locally configured QoS bit rate or the Home
Subscriber Server (HSS)-provided QoS bit rate.
local
use the locally configured QoS bit rate.
remove
erases the QoS UE Ambr configuration from the call control profile.
Performance Indicator Changes
show call-control-profile