Cisco Cisco ASR 5000
LORC Subscriber Overcharging Protection for S4-SGSN
Configuring Subscriber Overcharging Protection ▀
SGSN Administration Guide, StarOS Release 18 ▄
end
Notes:
group_name
: Enter an alphanumeric string up to 16 characters long to identify the cause code group.
Important:
This CLI does not have any control over Release Access Bearer Initiation. If Release Access Bearer
is going out of the S4-SGSN, the ARRL bit will be included if this CLI is enabled and if LORC (loss of radio coverage)
is detected.
is detected.
Configuring for 2G
Use commands similar to those illustrated below to
enable Subscriber Overcharging Protection feature for the S4-SGSN in the 2G network.
associate a cause code group with the GPRS Service configuration.
configure
context context_name
gprs-service service_name
s4-overcharge-protection bssgp-cause-code-group group_name
end
Notes:
group_name
: Enter an alphanumeric string up to 16 characters long to identify the cause code group.
Important:
This CLI does not have any control over release access bearer initiation. If Release Access Bearer is
going out of the S4-SGSN, the ARRL bit will be included if this CLI is enabled and if LORC (loss of radio coverage) is
detected.
detected.