Cisco Cisco Packet Data Gateway (PDG)

 

▄  SaMOG Administration Guide, StarOS Release 19 

Record Sequence 
Number 

C 

Partial record sequence number in the current SGSN, only present in case of partial records. 
A running sequence number with range of 1 through 4294967295 used to link partial records 
generated by the SaMOG for a specific bearer context (characterized with the same Charging 
ID and SaMOG address pair). This field will not be present if the first record is also the final 
record. 

Node ID 

OM 

Name of the recording entity. 
This field contains an identifier string for the node that generates the CDR. On the SaMOG 
Gateway, the NodeID field is a printable string of the ndddSTRING format. 

Record Extensions 

OC 

Set of network operator/manufacturer specific extensions to the record. Conditioned upon the 
existence of an extension. 

Local Record 
Sequence Number 

OM 

Consecutive record number created by the current node. The number is allocated sequentially 
including all CDR types. 
For each Node ID, the number with range from1 through 4294967295 is allocated sequentially 
for each CDR.  

APN Selection 
Mode 

OM 

An index indicating how the APN was selected. 
Set to 0:MS or network provided APN, subscriber verified.  

Access Point Name 
Operator Identifier 

OM 

The Operator Identifier part of the APN. 

Served MSISDN 

OM 

The primary MSISDN of the subscriber. 
Received in the Subscription-ID AVP in DEA. 

Charging 
Characteristics 

M 

The Charging Characteristics applied to the IP CAN bearer. 
Will be received from AAA in DEA 3GPP-Charging-Characteristics. 

RAT Type 

OC 

Radio Access Technology (RAT) type currently used by the Mobile Station as defined TS 
29.061 [205], when available.  
Set to WLAN. 

Charging 
Characteristics 
Selection Mode 

OM 

Holds information about how Charging Characteristics were selected. 
Values: 



 

AAASupplied 



 

homeDefault 



 

roamingDefault 



 

visitingDefault 

Dynamic Address 
Flag 

OC 

Indicates whether the served PDP address that is allocated during IP CAN bearer activation, is 
dynamic. This field will not be available if the address is static. 
Always set.