Cisco Cisco Packet Data Gateway (PDG) Dépliant
ALCAP Configuration Mode Commands
▀ associate
▄ Cisco ASR 5x00 Command Line Interface Reference
1220
associate
This command associates a previously configured SS7 routing domain with this ALCAP service on HNB-GW node
which will be used to define the SS7 routing domain in 3G UMTS networks.
which will be used to define the SS7 routing domain in 3G UMTS networks.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > ALCAP Service Configuration
configure > context context_name > alcap-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-alcap-service-service_name)#
Syntax
associate ss7-routing-domain ss7_rd_id
no associate ss7-routing-domain
no
Removes the associated SS7 routing domain id from this ALCAP service configuration.
ss7_rd_id
Identifies the SS7 routing domain index configured in Global configuration mode to associate with ALCAP
service for IuCS-over-ATM support.
The
service for IuCS-over-ATM support.
The
ss7_rd_id
must be an integer from 1 through 12.
Important:
For SS7 routing doman configuration, refer SS7 Routing Domain Configuration Commands Mode
chapter.
Usage
Use this command to associate a preconfigured SS7 routing domain index to provide IuCS-over-ATM
support towards CS core network for HNB subscriber.
A maximum of TBD SS7 routing domains can be configured in one ALCAP service.
support towards CS core network for HNB subscriber.
A maximum of TBD SS7 routing domains can be configured in one ALCAP service.
Example
Following command associates a predefined SS7 routing domain id
3
with ALCAP service to define routing
domain for IuCS-over-ATM supprot towards CS core networks:
associate ss7-routing-domain 3