Cisco Cisco Packet Data Gateway (PDG) Dépliant
AAA Server Group Configuration Mode Commands
▀ radius probe-timeout
▄ Cisco ASR 5x00 Command Line Interface Reference
206
radius probe-timeout
This command configures the timeout duration for Interchassis Session Recovery (ICSR) to wait for a response for
RADIUS authentication probes.
RADIUS authentication probes.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > AAA Server Group Configuration
configure > context context_name > aaa group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-aaa-group)#
Syntax
radius probe-timeout idle_seconds
default radius probe-timeout
default
Configures the default setting.
idle_seconds
Specifies the number of seconds to wait for a response from the RADIUS server before re-sending the
authentication probe.
authentication probe.
idle_seconds
must be an integer from 0 through 65535.
Default: 3
Usage
Use this command to set the time duration for ICSR, to wait for a response before re-sending the RADIUS
authentication probe to the RADIUS server.
authentication probe to the RADIUS server.
Example
The following command sets the authentication probe timeout to
120
seconds:
radius probe-timeout 120