Cisco Cisco Packet Data Gateway (PDG) Dépliant
CSCF Serving-CSCF Configuration Mode Commands
server-name ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3179
server-name
Enables/disables filling the server name AVP in MAR and SAR for Cx interface with configured server name. This
command is disabled by default.
command is disabled by default.
Important:
The
server-name
command has been moved to CSCF Service Configuration Mode in StarOS
release 14.0 and later.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > Serving-CSCF Configuration
configure > context context_name > cscf service service_name > serving-cscf
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service-serving-cscf)#
Syntax
server-name server_name
no server-name
no
S-CSCF uses configured cscf-hostname or bind IP address to fill the server name AVP in MAR and SAR for
Cx interface. This is the default CSCF behavior.
Cx interface. This is the default CSCF behavior.
server_name
Configures the name that will be used to fill the server name AVP in MAR and SAR for Cx interface.
name
must be from 1 to 63 alpha and/or numeric characters.
Usage
Use this command to enable/disable filling the server name AVP in MAR and SAR for Cx interface with
configured server name.
configured server name.
Example
The following command configures the CSCF server name as
stp-c-scscf1.cisco.co.kr
:
server-name stp-c-scscf1.cisco.co.kr