Cisco Cisco Packet Data Gateway (PDG) Dépliant
Exec Mode show Commands (A-C)
show configuration ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
4213
checksum
Generates and displays a checksum value for the configuration data.
context
name
Specifies an existing context for which configuration information is to be displayed as an alphanumeric string of 1
through 79 characters.
through 79 characters.
obsolete-encryption
Shows encrypted values using a weaker, obsolete encryption method (prior to release 12.2).
port
slot/port
Displays configuration information for a port identified by its slot and port numbers.
rohc [ all | profile-name
name
Specifies that information for all robust header compression (RoHC) profiles or the named profile is to be
displayed.
displayed.
showsecrets
Displays encrypted and unencrytpted secret keys saved in the configuration. If this keyword is not specified,
secret keys are not displayed.
secret keys are not displayed.
Important:
The showsecrets keyword is restricted to Administrator privilege or higher.
srp
Shows the Service Redundancy Protocol (SRP) configuration used for Interchassis Session Recovery (ICSR)
deployments.
deployments.
url url
Default: configuration which is currently in use.
This keyword is not available to users with Operator level permissions. Specifies the location of the
configuration data to use for information display. The
This keyword is not available to users with Operator level permissions. Specifies the location of the
configuration data to use for information display. The
url
may refer to a local or a remote file and must be
entered in the following format:
For the ASR 5000:
For the ASR 5000:
[ file: ]{ /flash | /pcmcia1 | /hd }[ /directory ]/file_name
tftp://{ host[ :port# ] }[ /directory ]/file_name
[ http: | ftp: | sftp: ]//[ username[ :password ]@ ] { host }[ :port# ][
/directory ]/file_name
/directory ]/file_name
For the ASR 5500:
[ file: ]{ /flash | /usb1 | /hd }[ /directory ]/file_name
tftp://{ host[ :port# ] }[ /directory ]/file_name