Cisco Cisco Packet Data Gateway (PDG) Dépliant
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
HSGW Service RoHC Configuration Mode Commands
▀ cid-mode
▄ Cisco ASR 5x00 Command Line Interface Reference
6030
cid-mode
This mode allows you to configure options that apply during RoHC compression for the service.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration > HSGW Service RoHC
Configuration
Configuration
configure > context context_name > hsgw-service service_name > ip header-compression rohc
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ip-header-compression-rohc)#
Syntax
cid-mode { large | small } max-cid integer
default cid-mode
default
Reset all options in the RoHC Profile Compression Configuration mode to their default values.
large
Use large packets with optional information for RoHC
small
This is the default packet size.
Use small RoHC packets.
Use small RoHC packets.
max-cid integer
Specifies the highest context ID number to be used by the compressor as an integer from 0 through 15 when
small packet size is selected, and 0 through 31 when large packet size is selected. Default: 15
small packet size is selected, and 0 through 31 when large packet size is selected. Default: 15
Usage
Use this command to set the RoHC packet size and define the maximum
Example
The following command sets large RoHC packet size and sets the maximum CID to
100
:
cid-mode large max-cid 100
The following command sets the cid-mode to the default settings of small packets and max-cid 0:
default cid-mode