Cisco Cisco Packet Data Gateway (PDG) Dépliant
IPSG RADIUS Server Configuration Mode Commands
radius accounting ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
6297
radius accounting
This command allows you to specify the IP address and shared secret of the RADIUS accounting client from which
RADIUS accounting requests are received. The RADIUS client can be either the access gateway or the RADIUS
accounting server depending on which device is sending accounting requests.
RADIUS accounting requests are received. The RADIUS client can be either the access gateway or the RADIUS
accounting server depending on which device is sending accounting requests.
Product
eWAG
IPSG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IPSG RADIUS Server Configuration
configure > context context_name > ipsg-service service_name mode radius-server
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ipsg-service-radius-server)#
Syntax
radius accounting { client { ipv4/ipv6_address | ipv4/ipv6_address/mask } [ encrypted ]
key key [ acct-onoff [ aaa-context aaa_context_name ] [ aaa-group aaa_server_group_name ]
[ clear-sessions ] + ] [ dictionary dictionary ] [ disconnect-message [ release-on-acct-
stop acct_stop_wait_timeout
key key [ acct-onoff [ aaa-context aaa_context_name ] [ aaa-group aaa_server_group_name ]
[ clear-sessions ] + ] [ dictionary dictionary ] [ disconnect-message [ release-on-acct-
stop acct_stop_wait_timeout
] [ dest-port destination_port_number ] + | interim create-
new-call | validate-client-ip }
no radius accounting { client { ipv4/ipv6_address | ipv4/ipv6_address/mask } | interim
create-new-call | validate-client-ip }
create-new-call | validate-client-ip }
default radius accounting { interim create-new-call | validate-client-ip }
no
If previously configured, removes the specified configuration.
ipv4/ipv6_address | ipv4/ipv6_address/mask
Specifies the IP address, and optionally subnet mask of the RADIUS client from which RADIUS accounting
requests are received.
requests are received.
ipv4/ipv6_address
/
ipv4/ipv6_address/mask
must be in IPv4 dotted-decimal or IPv6 colon-
separated-hexadecimal notation.
A maximum of 16 IP addresses can be configured.
A maximum of 16 IP addresses can be configured.
[ encrypted ] key key
encrypted
: Specifies that the shared key between the RADIUS client and this service is encrypted.
key key
: Specifies the shared key between the RADIUS client and this service.
In StarOS 12.2 and later releases,
key
with encryption must be an alphanumeric string of 1 through
236 characters, and without encryption an alphanumeric string of 1 through 127 characters. Note that
key
is case sensitive.