Cisco Cisco Packet Data Gateway (PDG) Dépliant
MME Service Configuration Mode Commands
max-pdns per-subscriber ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
6949
max-pdns per-subscriber
Specifies the maximum number of Packet Data Networks (PDNs) that a subscriber may simultaneously access through
this MME service.
this MME service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
max-pdns per-subscriber max_pdn
default max-pdns per-subscriber
default
Configures the maximum PDNs that a subscriber can simultaneously access through this MME service to the
default value of 3.
default value of 3.
max_pdn
Specifies the maximum number of PDNs that a subscriber may simultaneously access through this MME
service.
service.
max_pdn
is an integer from 1 through 11. Default: 3
Usage
Use this command to set the maximum number of PDNs that a subscriber may simultaneously access through
this MME service.
this MME service.
Example
The following command specifies that a maximum of
2
simultaneous PDNs can be accessed by a subscriber
at any given time through this MME service:
max-pdns per-subscriber 2