Cisco Cisco Packet Data Gateway (PDG) Dépliant
Network Service Entity- IP Local Configuration Mode Commands
▀ nsvc-failure-action
▄ Cisco ASR 5x00 Command Line Interface Reference
7054
nsvc-failure-action
This command enables and disables the sending of an NS-STATUS message with cause ‘ip-test fail’ when NSVC goes
down.
down.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Network Service Entity - IP Configuration
configure > network-service-entity ip-local
Entering the above command sequence results in the following prompt:
[local]host_name(nse-ip-local)#
Syntax
nsvc-failure-action send-ns-status
default nsvc-failure-action
default
Resets the command configuration to its default value. The default action is not to send an NS-STATUS
message. This is applicable only to NSVCs that are auto-learned and not configured.
message. This is applicable only to NSVCs that are auto-learned and not configured.
send-ns-status
Enables the sending of the NS-STATUS message.
Usage
Use this command to enable or disable sending an NS-STATUS messages when an NSVC goes down.
Example
Enable sending of the message:
nsvc-failure-action send-ns-status