Cisco Cisco Packet Data Gateway (PDG) Dépliant
SGSN PSP Configuration Mode Commands
▀ exchange-mode
▄ Cisco ASR 5x00 Command Line Interface Reference
8044
exchange-mode
Configures the exchange-mode for the PSP communication.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Peer-Server Configuration > PSP Configuration
configure > ss7-routing-domain routing_domain_id variant variant_type > peer-server id id
> psp instance psp_instance
> psp instance psp_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-ss7rd_id-ps-peer-server_id-psp-psp_instance)#
Syntax
exchange-mode [ double-ended | single-ended ]
Usage
Important:
Before using this command to set a value or reset the default, you must disassociate the PSP instance
with the
no associate
command. When you have modified your configuratioin with this command, then use the
associate
command to setup a new ASP association.
Use this command to toggle the exchange modes for the PSP to match the exchange mode supported by the
ASP. The exchange mode specifies what type of ASP messages exchange is used in an IPSP communication.
The
ASP. The exchange mode specifies what type of ASP messages exchange is used in an IPSP communication.
The
exchange-mode
must be configured for ‘single-ended’ if the
psp-mode
has been configured for
‘client’.
Example
Change the exchange mode from the standard double-ended to single-ended:
exchange-mode single-ended