Cisco Cisco Tunnel Terminating Gateway (TTG) Dépliant
CSCF NPDB Client Configuration Mode Commands
▀ npdb-primary-server
▄ Cisco ASR 5x00 Command Line Interface Reference
2964
npdb-primary-server
Configure the NPDB primary server.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > Serving-CSCF Configuration >
NPDB Client Configuration
NPDB Client Configuration
configure > context context_name > cscf service service_name > serving-cscf > npdb-client
client_name
client_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-npdb-client)#
Syntax
npdb-primary-server { address IPv4_address | domain domain } port port_number
no npdb-primary-server
address IPv4_address
|
domain domain
Specifies the NPDB primary server.
address IPv4_address
: IP addresses must be expressed in dotted decimal notation for IPv4.
domain
domain
: Domain name must be entered using from 1 to 255 alpha and/or numeric characters.
port
port_number
Specifies the port at which NPDB primary server listens.
port_number
may be an integer from 1024 to 65534.
no
Removes the NPDB primary server.
Usage
Use this command to configure the NPDB primary server.
Example
The following command adds an NPDB primary server with an IP address of
1.2.3.4
and a port number of
3878
:
npdb-primary-server address 1.2.3.4 port 3878