Cisco Cisco Packet Data Interworking Function (PDIF) Dépliant
HNB-GW Global Configuration Mode Commands
sctp ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
6083
max-retx { assoc | init | path }
max_retry
Sets the maximum number of retries allowed in SCTP states for SCTP association between HNB and HNB-
GW.
GW.
assoc
: Sets the maximum number of consecutive retransmissions to its peer is allowed. If the value of this
counter exceeds the limit configured with this keyword the HNB-GW considers the peer HNB unreachable
and stop transmitting any more data to it. The SCTP association is automatically closed when the peer
endpoint becomes unreachable. Default number of attempts
and stop transmitting any more data to it. The SCTP association is automatically closed when the peer
endpoint becomes unreachable. Default number of attempts
max_retry
for this state is 10.
init
: Sets the maximum attempts allowed after T1-init timer expires. If the T1-init timer expires then the
HNB-GW retransmits INIT chunk and re-start the T1-init timer without changing state. This is repeated up to
the configured times with this configuration. After that, the HNB-GW aborts the initialization process.
Default number of attempts
the configured times with this configuration. After that, the HNB-GW aborts the initialization process.
Default number of attempts
max_retry
for this state is 5.
path
: Sets the maximum attempts allowed after T3-rtx timer expires. Each time the T3-rtx timer expires on
any address, or when a HEARTBEAT sent to an idle address is not acknowledged within a RTO, the error
counter of that destination address incremented. When the value in the error counter exceeds this protocol
parameter of that HNB address, the HNB-GW marks the destination transport address as inactive. Default
number of attempts
counter of that destination address incremented. When the value in the error counter exceeds this protocol
parameter of that HNB address, the HNB-GW marks the destination transport address as inactive. Default
number of attempts
max_retry
for this state is 5.
max_retry
is an integer from 0 through 255.
max-in-strms
in_strms
Sets the maximum number of inward SCTP streams allowed on HNB-GW for an associated HNB in an SCTP
association as an integer from 1 through 16. Default: 4
association as an integer from 1 through 16. Default: 4
max-out-strms
out_strms
Sets the maximum number of outgoing SCTP streams allowed from HNB-GW for an associated HNB in an
SCTP association as an integer from 1 through 16. Default: 4
SCTP association as an integer from 1 through 16. Default: 4
Usage
Use this command to configure the SCTP protocol messaging and session management parameters in SCTP
association between HNB and HNB-GW.
association between HNB and HNB-GW.
Example
The following command sets the maximum number of inward SCTP streams allowed to
4
on HNB-GW for
the SCTP association:
default max-in-strms