Cisco Cisco Packet Data Interworking Function (PDIF) Dépliant
HNB-PS Network Configuration Mode Commands
▀ sgsn deadtime
▄ Cisco ASR 5x00 Command Line Interface Reference
6160
Timer value sets the duration in seconds for a timer which started once HNB-GW receives PC-STATE-
DOWN or SSN-STATE-DOWN (RANAP) indication from SCCP for a peer SGSN. On expiry of this timer
the peer SGSN is marked as dead and all Iu-PS connections towards that SGSN shall be released.
DOWN or SSN-STATE-DOWN (RANAP) indication from SCCP for a peer SGSN. On expiry of this timer
the peer SGSN is marked as dead and all Iu-PS connections towards that SGSN shall be released.
Important:
This command can be entered only once. Reentering this command overwrites the previous
parameters.
Example
The following command configures the deadtime timer value for
10
seconds on HNB-GW. Once HNB-GW
receives PC-STATE-DOWN or SSN-STATE-DOWN (RANAP) indication from SCCP for a peer SGSN the
HNB-GW waits for configured period and on expiry of timer it marks the specific SGSN as dead:
HNB-GW waits for configured period and on expiry of timer it marks the specific SGSN as dead:
sgsn deadtime 10