Cisco Cisco Packet Data Interworking Function (PDIF)

 

▄  Statistics and Counters Reference, StarOS Release 16  

 

 

Username 

The subscriber’s username. 

Callid 

The subscriber’s call identification (callid) number. 

Msid 

The subscriber’s mobile station identification (MSID) number. 

LCP State 

Indicates whether or not the Link Control Protocol (LCP) was successfully negotiated 
(Opened). If not, Not Opened will be displayed. 

mtu 

The subscriber’s maximum transmission unit (MTU) size in octets. 

mru 

The subscriber’s maximum reception unit (MRU) size in octets. 

auth algorithm 

The protocol the subscriber used for authentication. Possible protocols are: 



 

CHAP: Challenge Handshake Authentication Protocol 



 

PAP: Password Authentication Protocol 

PFC (loc to rem): (rem 
to loc): 

The PPP PFC transmit and receive settings. 
(loc to rem): Specifies how Protocol field Compression is applied for PPP packets 
transmitted to the Peer. Possible values are: 



 

ignore 



 

apply 



 

reject 

(rem to loc): Specifies whether Protocol Field Compressed PPP packets can be 
received from the Peer. Possible values are: 



 

allow 



 

deny 

ACFC (loc to rem): (rem 
to loc): 

Information is displayed for both directions of the session (remote-to-local and 
local-to-remote). 

async map 

The PPP asynchronous control character mapping (a 32-bit map). Information is 
displayed for both directions of the session (remote-to-local and local-to-remote). 

IPCP State 

Indicates whether or not the Internet Protocol Control Protocol (IPCP) was 
successfully negotiated (Opened). If not, Not Opened will be displayed.