Cisco Cisco Packet Data Gateway (PDG)
System Settings
Configuring System Administrative Users ▀
VPC-VSM System Administration Guide, StarOS Release 19 ▄
59
context local
operator name { password pwd | encrypted password pwd }
end
Notes:
Additional keyword options are available that identify active administrators or place time thresholds on the
administrator. Refer to the Command Line Interface Reference for more information about the operator
command.
command.
Save the configuration as described in the Verifying and Saving Your Configuration chapter.
Configuring Context-level Inspectors
Use the example below to configure context-level inspectors:
configure
context local
inspector name { password pwd | encrypted password pwd }
end
Notes:
Additional keyword options are available that identify active administrators or place time thresholds on the
administrator. Refer to the Command Line Interface Reference for more information about the inspector
command.
command.
Save the configuration as described in the Verifying and Saving Your Configuration chapter.
Verifying Context-level Administrative User Configuration
Verify that the configuration was successful by entering the following command:
show configuration context local
This command displays all of the configuration parameters you modified within the Local context during this session.
The following displays sample output for this command. In this example, a security administrator named testadmin was
configured.
The following displays sample output for this command. In this example, a security administrator named testadmin was
configured.
config
context local
interface mgmt1
ip address 192.168.1.10 255.255.255.0
#exit
subscriber default