Cisco Cisco Packet Data Gateway (PDG)
Thresholding Configuration Guide, StarOS Release 16 ▄
131
Chapter 22
Port Utilization Thresholds
Threshold monitoring can be enabled for the port utilization values described in the following table.
Value
Description
To configure, go to
section:
section:
Receive port
utilization
utilization
Enables the generation of alerts or alarms based on the port utilization
percentage for data received during the polling interval.
percentage for data received during the polling interval.
Transmit port
utilization
utilization
Enables the generation of alerts or alarms based on the port utilization
percentage for data transmitted during the polling interval.
percentage for data transmitted during the polling interval.
High port activity
Enables the generation of alerts or alarms based on the overall port utilization
percentage during the polling interval.
percentage during the polling interval.
Important:
Ports configured for half-duplex do not differentiate between data received and data transmitted.
(The transmitted and received percentages are combined.) Therefore, to avoid redundant alarms, it is recommended that
only the receive or transmit utilization threshold be configured.
only the receive or transmit utilization threshold be configured.