Cisco Cisco Packet Data Gateway (PDG) Guida Dell'Amministratore
Troubleshooting
▀ Detecting Faulty Hardware
▄ Cisco ASR 5500 System Administration Guide
178
MIO/UMIO – Interface Activity LED States
The Activity LED associated with a 1000Base-T (management) or 10 Gigabit Ethernet port on an MIO/UMIO daughter
card (subscriber traffic) indicates the presence of traffic on the network link. This LED should be green when data is
being transmitted or received over the interface.
card (subscriber traffic) indicates the presence of traffic on the network link. This LED should be green when data is
being transmitted or received over the interface.
The possible states for this LED are described in the following table. If the LED is not green, use the troubleshooting
information in the table to diagnose the problem.
information in the table to diagnose the problem.
Table 20. MIO/UMIO – Interface Activity LED States
Color
Description
Troubleshooting
Flashing
Green
Green
Traffic is present on the
link
link
None needed.
None
No traffic is present on the
link
link
None needed if there is no activity on the link. Prior to interface configuration, this
is normal operation.
is normal operation.
Checking the LEDs on the DPC and UDPC
Each DPC/UDPC is equipped with status LEDs as listed below:
Run/Fail
Active
Redundancy
Figure 11. DPC/UDPC Status LEDs