Cisco Cisco Packet Data Gateway (PDG) Nota Di Rilascio
S-GW Changes in Release 15.0
▀ S-GW Enhancements for September 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
558
Configuration related to handling eGTP procedure.
configure
sgw-service service_name [ -noconfirm ]
[ default ] egtp cause-code temp-failure dbr-proc
no egtp cause-code temp-failure
end
Note:
cause-code temp-failure dbr-proc
: Enables handling of Delete Bearer failure response from peer with
cause code 110 (Temporary Failure).
Default behavior is Disabled.
gtpc
The following new command configures the GTP-C settings for the specified peer profile.
configure
peer-profile service-type sgw-network { default | name profile_name } [ -noconfirm ]
gtpc { echo { interval seconds | retransmission-timeout seconds } | max-
retransmissions seconds | retransmission-timeout seconds }
retransmissions seconds | retransmission-timeout seconds }
default gtpc { echo { interval | retransmission-timeout } | max-retransmissions |
retransmission-timeout }
retransmission-timeout }
no gtpc echo
end
Notes:
gtpc echo interval seconds
must be an integer from 60 to 3600. Default: 60
gtpc echo retransmission-timeout seconds
must be an integer from 1 to 20.
Default: 5
gtpc max-retransmissions number
must be an integer from 0 to 15.
Default: 4
gtpc retransmission-timeout seconds
must be an integer from 1 to 20.
Default: 5
isr-sequential-paging
Initiates Intelligent Paging for ISR feature for specified APN Profile, where paging first towards the last known RAT,
then towards the other RAT.
then towards the other RAT.
configure