Cisco Cisco Packet Data Gateway (PDG) Nota Di Rilascio
AAA Changes in Release 15.0
▀ AAA Enhancements for September 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
68
no condition priority priority
end
event-notif-service
Applicable Product(s): GGSN, HA, HSGW, IPSG, MME, PDSN, P-GW, S-GW
This command enables or disables the ORB Notification Service and allows the configuration of filters dictating which
event notifications are sent. This command has been enhanced to support additional event IDs ranging from 204900 to
204999 for RLF related logging.
event notifications are sent. This command has been enhanced to support additional event IDs ranging from 204900 to
204999 for RLF related logging.
config
orbem
event-notif-service [ filter { event-id event_id [ to final_event_id } ]
no event-notif-service [ filter { event-id event_id [ to final_event_id } ]
end
event-update
Applicable Product(s): GGSN, HA, HSGW, IPSG, PDSN, P-GW, S-GW
This command has been enhanced to support a new event trigger “CHARGING_CORRELATION_EXCHANGE (28)”
in the configuration. This is applicable only for dynamic rules.
in the configuration. This is applicable only for dynamic rules.
configure
context context_name
ims-auth-service service_name
policy-control
event-update send-usage-report events { charging-correlation-exchange }
{ default | no } event-update
end
event-update
Applicable Product(s): GGSN, HA, HSGW, IPSG, PDSN, P-GW, S-GW
This command configures sending usage monitoring information in event updates either for all event triggers or for a
specific event trigger. This command has been extended to support APN_AMBR_MODIFICATION_FAILURE and
DEFAULT_EPS_BEARER_QOS_MODIFICATION_FAILURE event triggers in EPS 3.0.
specific event trigger. This command has been extended to support APN_AMBR_MODIFICATION_FAILURE and
DEFAULT_EPS_BEARER_QOS_MODIFICATION_FAILURE event triggers in EPS 3.0.
If the modification of the QoS per APN fails, the PCEF will retain the existing QoS per APN without any modification
and send to the PCRF a new CCR command with the Event Trigger set to APN_AMBR_MODIFICATION_FAILURE
providing the retained value within the APN-Aggregate-Max-Bitrate-UL AVP and/or APN-Aggregate-Max-Bitrate-DL
AVP included in QoS-Information AVP.
and send to the PCRF a new CCR command with the Event Trigger set to APN_AMBR_MODIFICATION_FAILURE
providing the retained value within the APN-Aggregate-Max-Bitrate-UL AVP and/or APN-Aggregate-Max-Bitrate-DL
AVP included in QoS-Information AVP.