Cisco Cisco Aironet 350 Wireless LAN Client Adapter
7
Release Notes for Cisco Aironet Client Utilities (Version 2.22) and Drivers (Version 2.22) for Windows CE
OL-2895-02
Caveats
Windows CE Device Causes Abnormal Characters in Access Point Association Table
When a Windows CE device comes out of suspend mode, abnormal characters appear in its access
point’s association table (CSCdx73786). This caveat is resolved in driver release 2.22.
point’s association table (CSCdx73786). This caveat is resolved in driver release 2.22.
Open Caveats
The following are known caveats for client utility release 2.22 and driver release 2.22.
Screen Flickers When Client Adapter Uses Max PSP Mode
The screen of the Windows CE device flickers when the client adapter is set to operate in Max PSP mode
(CSCdw03420). This caveat will be resolved in a future release.
(CSCdw03420). This caveat will be resolved in a future release.
Overlapping Icons in the Cisco Folder
After you install the driver and client utilities, the icons for the utilities overlap one another in the Cisco
folder (CSCdw03461).
folder (CSCdw03461).
Incorrect Error Message Displays If ActiveSync Is Not Installed on the Laptop or PC
If you double-click the WinCE211-PCMCIA-LMC-vxxx.exe or WinCE30-PCMCIA-LMC-vxxx.exe file
to install the latest version of the Windows CE driver and client utilities but ActiveSync is not installed
on the laptop or PC to which the Windows CE device is connected, a message appears indicating that the
ceutil.dll file cannot be found. However, the message should read, “Windows CE Services not found on
this computer. Setup cannot continue and will now exit” (CSCdv50211).
to install the latest version of the Windows CE driver and client utilities but ActiveSync is not installed
on the laptop or PC to which the Windows CE device is connected, a message appears indicating that the
ceutil.dll file cannot be found. However, the message should read, “Windows CE Services not found on
this computer. Setup cannot continue and will now exit” (CSCdv50211).
Click OK to acknowledge the message and terminate the installation utility. Then install ActiveSync on
the laptop or PC and start the driver installation procedure again.
the laptop or PC and start the driver installation procedure again.
Note
ActiveSync can be obtained from the CD that shipped with your Windows CE device, from
the device manufacturer, or from Microsoft; however, Cisco recommends that you install the
latest version of ActiveSync.
the device manufacturer, or from Microsoft; however, Cisco recommends that you install the
latest version of ActiveSync.
Client Adapter Not Found after Symbol Device Suspends and Resumes
After some Symbol devices are suspended and resumed, ACU indicates that the installed client adapter
is not found (CSCdx17502). To resolve this issue, reset the Symbol device.
is not found (CSCdx17502). To resolve this issue, reset the Symbol device.
Windows CE Devices Fail to Get an IP Address
When an HP Jornada or Compaq Ipaq 3800 device with MIC and WEP enabled is turned off and on
again, it fails to get an IP address from the DHCP server (CSCin13763).
again, it fails to get an IP address from the DHCP server (CSCin13763).
Pings Fail after Upgrading or Downgrading the Firmware
Pings fail after the firmware for a Cisco Aironet 4800B client adapter is upgraded or downgraded on an
HP Jornada PPC device (CSCin13767). To resolve this issue, reset the Windows CE device.
HP Jornada PPC device (CSCin13767). To resolve this issue, reset the Windows CE device.