Cisco Cisco Aironet 350 Wireless LAN Client Adapter
15
Release Notes for Cisco Aironet 350 and CB20A Client Adapter Install Wizard 1.6 for Windows
OL-7682-01
Installing or Upgrading Client Adapter Software
e.
When you are finished making selections, click Next.
Step 17
The installation process begins, and you are notified as each component is installed. Perform one of the
following:
following:
•
If a message appears asking if you wish to reboot now, click Yes.
Note
To ensure that your client adapter software is installed properly, Cisco recommends that you
click Yes to reboot your computer now.
click Yes to reboot your computer now.
•
If a message appears indicating that the system is about to reboot, click OK and allow your computer
to restart.
to restart.
•
If the following message appears, click OK and then reboot your computer: “The installation will
complete and applications will be installed when a wireless LAN client adapter is inserted. If an
adapter is already inserted, remove and reinsert the adapter or reboot the machine.”
complete and applications will be installed when a wireless LAN client adapter is inserted. If an
adapter is already inserted, remove and reinsert the adapter or reboot the machine.”
The Found New Hardware screen appears. Depending on your computer’s operating system, you
may have to click Next. The driver and other software components are installed. Then an ACM icon
appears in the Windows system tray (unless you changed the default value during installation).
Perform one of the following:
may have to click Next. The driver and other software components are installed. Then an ACM icon
appears in the Windows system tray (unless you changed the default value during installation).
Perform one of the following:
–
If a message appears asking if you wish to reboot now, click Yes.
Note
To ensure that your client adapter software is installed properly, Cisco recommends that
you click Yes to reboot your computer now.
you click Yes to reboot your computer now.
–
If a message appears indicating that the system is about to reboot, click OK and allow your
computer to restart.
computer to restart.
Allow
Auto-Provisioning?
Auto-Provisioning?
Enables a protected access credentials (PAC) file to be obtained
automatically as needed (for instance, when a PAC expires, when the
client adapter accesses a different server, when the EAP-FAST
username cannot be matched to a previously provisioned PAC, etc.).
automatically as needed (for instance, when a PAC expires, when the
client adapter accesses a different server, when the EAP-FAST
username cannot be matched to a previously provisioned PAC, etc.).
Options: Yes or No
Default: Yes
Note
This parameter is applicable only to client adapters that are
installed in computers running Windows 2000 or XP.
installed in computers running Windows 2000 or XP.
Table 1
Software Components and Their Parameters (continued)
Component or Parameter
Description