Cisco Cisco Aironet 1200 Access Point
20
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(7)JA
OL-8056-01
Caveats
Cisco has made free software available to address these vulnerabilities for affected customers. Fixed
Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all
vulnerabilities mentioned in this advisory.
Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all
vulnerabilities mentioned in this advisory.
There are no workarounds available to mitigate the effects of any of the vulnerabilities apart from
disabling the protocol or feature itself.
disabling the protocol or feature itself.
This advisory is posted at
•
CSCeh43628—1230 series access point no longer exhibits DHCP failure when client is configured
for mixed mode (CKIP and 128-key WEP).
for mixed mode (CKIP and 128-key WEP).
•
CSCeh49024—Memory leak no longer occurs when an invalid layer 3 WLCCP packet is received.
•
CSCsa42443—Autoinstall program now uses hostname from DHCP (if present) when access point
is booted with factory defaults.
is booted with factory defaults.
•
CSCsa66924—Access point no longer crashes and reboots when policy-map command is issued.
•
CSCsa71255—Logging snmp-trap no longer returns to default after reboot.
•
CSCeh26214—IP RADIUS source interface no longer disappears after reboot.
•
CSCei07867—RM22A radio output power for different channels has been documented in the
appropriate hardware installation guides.
appropriate hardware installation guides.
•
CSCsb06824—Open authentication is no longer added to an EAP SSID when the configuration is
loaded.
loaded.
•
CSCsa73846 (duplicate of CSCed16920)—350 series access point no longer shows high CPU and
TTY background tracebacks.
TTY background tracebacks.
•
CSCsa78495—LRS configured 1200 series access point now updates unknown username count.
•
CSCsa88841—DFS-IAPP constant has been changed to 0x34.
•
CSCsb09778 (duplicate of CSCsb06218)—1130 and 1200 access point boot loaders now boot IOS
when environment variables are deleted from flash.
when environment variables are deleted from flash.
•
CSCsb27662—Reports greater than 7900 bytes are no longer dropped by WLSE at RM AGG.
•
CSCsb06236—CCKM repeater no longer hangs during access point radio scan.
•
CSCsa90752—Trunking no longer fails on an 1100 series access point when in workgroup bridge
mode.
mode.
•
CSCeh97288 (duplicate of CSCsa79281)—Spectralink phones no longer reboot after upgrading to
Cisco IOS Release 12.3(4)JA
Cisco IOS Release 12.3(4)JA
•
CSCsb11227—1130 series access points operating as a WDS no longer run out of memory.
•
CSCsb14224—Reverse ARP functions on all VLANs
•
CSCeb52431—The 1100 series access point no longer sends hundreds of additional authentication
requests to a TACACS+ server after successful authentication.
requests to a TACACS+ server after successful authentication.
•
CSCef95410—WLCCP packets received from an access point no longer causes the radio interface
output drop counter to increment.
output drop counter to increment.
•
CSCsa67267—The mbssid command no longer fails on the CLI and the GUI.
•
CSCef11167—The access point now returns an accurate value when you poll
cDot11ActiveWirelessClients through SNMP.
cDot11ActiveWirelessClients through SNMP.
•
CSCeh38024—Access point WPAv2 migration mode now supports Cisco Aironet CB20A client
radios running firmware version 2.0.0.184 configured for optional WPAv2.
radios running firmware version 2.0.0.184 configured for optional WPAv2.