Philips WP3891/01 Pure Water Dispenser WP3891/01 Dépliant

Issue date 2010-12-21

Version: 9.1.1

12 NC: 0000 000 00000

© 2010 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice. 
Trademarks are the property of Koninklijke Philips 
Electronics N.V. or their respective owners.

Specifications

WP3891/01

UV water purifier

UV Class A Battery backup 

Highlights

 

Advanced state-of-the-art UV (PLS) technology 

destroys known waterborne viruses, 

bacteria,parasites and amoebae while the activated 

carbon and sediment filter removes turbidity, 

chlorine, volatile organic chemicals (VOC’s), cysts, 

larger micro-organisms and improves taste.

The maximum flow rate of 1.2 liter per minute 

ensures that you have safe drinking water available at 

any time.

After 2700 liters of water consumption, PureProtect 

alert sends out a signal. There will still be enough 

capacity for another 300 liters after the signal.

Replacing the filter is something you can easily do 

yourself thanks to the simple Tilt & Twist 

mechanism.

This appliance has low electricity consumption and is 

rated at 25 watts. To make it even more energy 

efficient, the UV lamp switches off when the 

appliance has not been used for 10 minutes.

While the purifier is dispensing water, an optional 

musical reminder will notify you that the dispenser is 

on.

Product is certified according to microbiological 

performance standard BIS 14724 and Drinking water 

standard BIS 10500 by the Bureau of Indian 

Standards

WQA (Water Quality Association, USA) only 

awards the Gold Seal to those systems, components 

or additives that have met or exceeded industry 

standards for contaminant reduction, structural 

integrity, and material safety. This product is certified 

by WQA to conform to NSF/ANSI 42 for the 

removal of chlorine and particulates(removes all 

classes of particulates from Class I till Class VI - 

particle size 0.5µm till 80 µm), NSF/ANSI 53 for the 

removal of turbidity, volatile organic 

chemicals(VOC’s)and cysts and NSF/ANSI 55 Class 

A for microbiological dis-infection.

Tested by Kiwa Water Research: Microbiological 

performance tested by Kiwa Water Research (The 

Netherlands) according to the NSF standard 55, 

Class A protocol (2004).

• Frequency: 50 Hz

• Voltage: 220-240 V

• Water  flow  rate:  max  1.2 l/min

• Power rating: 25 W

• Product weight: 4.4 kg

• Product dimensions (L x W x H): 287 x 156 x 

422 mm

• PLS UV lamp: 9 W

• Max. input water temperature: 45 °C

• Max. input water pressure: 2.0 bar

• Min. input water pressure: 0.5 bar

• Min. input water temperature: 5 °C

•