Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
Step 7
Click the Provisioning > WDM-ANS > Optical Side tab.
Step 8
In the optical sides table, click the optical side corresponding to the amplifier or optical service channel cards installed in
Side B of ROADM Node 1.
Side B of ROADM Node 1.
Step 9
Click Delete.
Step 10
In the confirmation dialog box, click Yes.
Step 11
Click the Provisioning > WDM-ANS > Internal Patchcords tab.
Step 12
Look in the To column of the internal patchcords table and make a list of internal patchcords that connect the amplifier or
optical service channel cards in Side B to the 40-WSS-C/40-DMX-C card (or the 32WSS/32DMX and 32WSS-L/32DMX-L
cards) in Side A of ROADM Node 1.
optical service channel cards in Side B to the 40-WSS-C/40-DMX-C card (or the 32WSS/32DMX and 32WSS-L/32DMX-L
cards) in Side A of ROADM Node 1.
Step 13
Click Delete.
Step 14
In the confirmation dialog box, click Yes.
Step 15
Remove the physical fiber and attenuators, if present, that connect the amplifier or optical service channel cards in Side
B to the 40-WSS-C/40-DMX-C card (or the 32WSS/32DMX and 32WSS-L/32DMX-L cards) in Side A of ROADM Node
1.
B to the 40-WSS-C/40-DMX-C card (or the 32WSS/32DMX and 32WSS-L/32DMX-L cards) in Side A of ROADM Node
1.
Step 16
Complete the
to delete the amplifier
or optical service channel cards installed in Side B of ROADM Node 1.
Step 17
Complete the "DLP-G46 Log into CTC" task in the "
" document at the ROADM
Node 2. The following figure shows the ROADM Node 2 shelf view.
Figure 3: OADM Node 2 Shelf View
30