Cisco Cisco Performance Agent 1.0 Libro bianco
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 10
! Configure PA flow monitor type
flow monitor type mace mace-monitor
record mace-record
exporter mace-export
!
! interesting traffic
access-list 100 permit tcp any host 10.0.0.1 eq 80
class-map match-any mace-traffic
match access-group 100
!
! Configure PA policy map
policy-map type mace mace_global
class mace-traffic
flow monitor mace-monitor
!
! Enable PA in the WAN interface
interface Serial0/0/0
mace enable
Using Cisco Prime NAM to Report Application Performance
Step 1. To validate data from Cisco Performance Agent is received on the NAM, go to Setup > Traffic > NAM
Data Sources. An example is shown in Figure 3.
Figure 3. Validating data from Cisco Performance Agent on NAM
Step 2. After confirming that Cisco Performance Agent data is received, the NAM reports on Cisco Performance
Agent in the different dashboards, such as traffic summary (for example, Monitor > Overview > Traffic
Summary), as shown in Figure 4.
Summary), as shown in Figure 4.