Cisco Cisco Prime Optical 9.3

CSCtr25655

You cannot delete a channel group if it contains ports. You must delete the ports before deleting the channel 
group.

CSCtr25671

The TP Tunnel table incorrectly reports tunnel status. You must use the L2 Sync Service menu to synchronize 
the status.

CSCtr25724 

The TP Tunnel View/Modify window is not updated.

CSCtr26469

There is a graphical issue on highlighted links in the TP Tunnel wizard.

CSCtr27906

When tracing a modified TP tunnel, the trace color is incorrect. The working LSP is displayed as violet. A 
violet trace normally indicates a protected LSP.

CSCtr28859

Pseudowire services with unmanaged endpoints are discovered as Incomplete.

CSCtr29018

The NE Purge Fail icon does not appear.

CSCtr32280

The EVC Provision wizard does not work correctly with manual routing.

CSCtr33042

Pseudowires are not listed in the PW table when opened from a TP tunnel.

CSCtr35080

The Inner and Outer VLAN tag fields in the EFP tag rewrite panel should only accept numeric values.

CSCtr35245

The client hangs when starting an IOS console from a CPT node.

CSCtr35560

The Circuit table is empty when launched at the card level.

CSCtr35664

Changes to a discovered CPT service are not applied.

CSCtr37806

The Link table on multiple nodes returns links related only to the first node.

CSCtr38128

You cannot set optical thresholds on the the PTSA 10GE ports.

CSCtr38196

You cannot set a regeneration peer slot on an on MSTP transponders card.

CSCtr38535

The TP Tunnel Trace view does not refresh.

CSCtr40455

You should not be able to remove both LSPs from a protected TP tunnel.

CSCtr40647

Channel Group creation fails when the MTU value is different from the default value. 

CSCtr40668

There is no Port Type value in the NE Explorer > DCC/GCC/OSC tab.

CSCtr40753

You cannot set Carrier Delay on PT_10GE ports - Embedded CPT issue.

CSCtr42838

There is an Oracle memory leak.

CSCtr45103

On an HA local redundancy setup, the Prime Optical server on a secondary node does not work correctly 
because three soft links are missing.

CSCtr45851

The manual and automatic routing selection in the EVC provisioning wizard allows you to move to the next 
screen without choosing any options.

CSCtr45865

EVC provisioning fails because of an incompatible bandwidth value.

CSCtr48753

The EVC provisioning wizard does not permit you to add more than two drops to an EPVLAN or EPLAN 
service.

CSCtr48814

Newly added drops on an EVC service are provisioned with the admin EFP state shown as down.

CSCtr50934

The rack view is unavailable on an ETSI MSTP multishelf NE.

CSCtr51487

Setting the Ingress Table Map Config parameter should not be possible in an invalid configuration.

CSCtr51588

The GateWay/CORBA createTopologicalLink API returns an error when you create manual physical links.

CSCtr54174

When you create a channel group, LACP is enabled by default, even if the LACP option is deselected.

CSCtr54187

You cannot initialize an ML card when the card mode is RPR 802.17.