Cisco Cisco 1 GHz GainStar Node Riferimenti tecnici
6
78-4038184-01 Rev B
Installation Procedure
This photo illustrates the recommended method for tightening the back nut. The
torque wrench is fitted with a flare nut crow's foot, shown in detail below.
This accessory offers the benefit of capturing the nut so that the wrench will not
slip off, an especially helpful feature when working from a bucket truck.
Note: You must set the flare nut crow's foot at a 90 degree angle relative to the
Note: You must set the flare nut crow's foot at a 90 degree angle relative to the
head of the torque wrench. Any position other than 90 degrees will alter the set
torque value.