Cisco PowerKEY CableCARD Module 802 Guida Utente
Chapter 1 Set Up the CableCARD or M-Card Module
10
4021652 Rev B
Configuring the CableCARD Server on the DNCS
Configuring the CableCARD server enables the DNCS to send information from the
DNCS to the CableCARD and M-Card modules. To activate the CableCARD Server
on the DNCS, complete these steps.
DNCS to the CableCARD and M-Card modules. To activate the CableCARD Server
on the DNCS, complete these steps.
Important: This procedure also configures the DNCS for autobinding. To disable
autobinding, go to Disabling Autobinding (on page 16).
autobinding, go to Disabling Autobinding (on page 16).
Note: For additional details on configuring CableCARD and M-Card modules, refer
to the Separable Security Host Staging Guide (part number 736107) or to the DNCS
Online Help.
1 From the DNCS Administrative Console, select the DNCS tab.
2 Select the Home Element Provisioning tab and then click CableCARD. The
to the Separable Security Host Staging Guide (part number 736107) or to the DNCS
Online Help.
1 From the DNCS Administrative Console, select the DNCS tab.
2 Select the Home Element Provisioning tab and then click CableCARD. The
Define CableCARD Filter screen opens in a Web browser.