Cisco PowerKEY CableCARD Module 802 Guida Utente
Configure the DNCS for CableCARD and M-Card Support
4021652 Rev B
13
Card Authorization Phone Number: The phone number that is displayed on
a subscriber’s television screen immediately after they install the CableCARD
module and power on their television. Type the telephone number of the
provider who can verify that the CableCARD module was authorized.
Important:
–
a subscriber’s television screen immediately after they install the CableCARD
module and power on their television. Type the telephone number of the
provider who can verify that the CableCARD module was authorized.
Important:
–
You can enter up to 20 alphanumeric characters (including spaces and
punctuation) in this field.
punctuation) in this field.
–
The phone number shown is an example only. Type the telephone
number that is unique to your system.
number that is unique to your system.
Note: The mmi.txt and gfc.txt files no longer need to be created manually.
They are automatically created and attached to the BFS as shown in the
following example.
They are automatically created and attached to the BFS as shown in the
following example.
5 Click Save CableCARD Server Configuration on the left side of the screen to
save these parameters. The CableCARD Data Summary screen appears in the
forefront.
forefront.
6 If you are finished, click Exit All CableCARD Screens to close the CableCARD
window.